Setting Auto Wbc; Setting Indoor Wbc; Setting Outdoor Wbc; Setting Atw (Auto Tracing White Balance) - Honeywell HDZ30A User Manual

Table 4-1 Color Temperatures by Light Source (cont'd)
Light Sources
Household Lighting
75-watt Bulb
Candle Flame

Setting Auto WBC

In this mode, white balance works within its color temperature range. This mode computes the
white balance value output using color information from the entire screen. It outputs the proper
value using the color temperature radiating from a black subject based on a range of values
from 3,000 K to 7,500 K.

Setting Indoor WBC

This setting is the 3,200 K base mode, for indoor environments.

Setting Outdoor WBC

This setting is the 5,800 K base mode, for outdoor environments.

Setting ATW (Auto Tracing White Balance)

The HDZ Series PTZ dome camera takes out the signals in a screen in the range from 2,000 K
to 10,000 K.

Setting Manual WBC

In this mode, users can change the White Balance value manually (see
B gain are adjustable and range from 000 to 127.
Figure 4-4 Manual WBC Mode
WBC MENU
R GAIN
B GAIN
EXIT+SAVE
After completing WBC parameter settings, exit the WBC MODE menu and go back to the Main
Page 1 to continue setting other relevant camera functions.
Operation and Configuration | 55
Color Temperature in K
2,500 to 3,000
2,820
1,200 to 1,500
050 →
050 →
YES
Figure 4-4). R gain and
800-16526 - A - 07/2014