Lenovo ThinkCentre M83 Hardware Maintenance Manual page 263
Machine types: 10a0, 10a1, 10a2, 10a3, 10a4, 10a5, 10a6, 10a7, 10a8, 10a9, 10aa, 10ab, 10be, 10ag,10ah, 10aj, 10ak, 10al,10am, 10an, 10df, 10dg, 10dh, 10dj, 10e8, 10e9, 10ea, and 10eb
Hide thumbs
Also See for ThinkCentre M83:
- User manual (178 pages) ,
- Hardware maintenance manual (294 pages) ,
- Safety, warranty, and setup manual (2 pages)
Table of Contents
Advertisement
5. Flex the sides of the hard disk drive adapter bracket and then pivot the hard disk drive adapter to
remove the adapter from the adapter bracket.
Figure 244. Removing the hard disk drive adapter from the adapter bracket
6. To remove the hard disk drive from the adapter, lift the adapter retaining latch. Slide the hard disk drive
towards the retaining latch and then lift the hard disk drive out of the adapter.
Figure 245. Removing the secondary hard disk drive from the adapter
7. Install the four screws to the new hard disk drive.
Figure 246. Installing the four screws to the hard disk drive
.
Chapter 10
Replacing FRUs (machine types: 10A4, 10A5, 10AA, 10AB, 10DF, 10DG, 10DH, 10DJ, 10E8, 10E9, 10EA, and 10EB)
255
- Quick Links:
- For Machine Types: 10A2, 10A3, 10A8,...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
