6. Slide the new optical drive into the drive bay from the front of the computer until the optical drive
snaps into position.
Figure 29. Installing the optical drive
7. Connect the signal cable and the power cable to the new optical drive.
Figure 30. Connecting the optical drive
8. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on page 94.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 156.
Installing or replacing the card reader
This section provides instructions on how to replace the card reader.
102
ThinkCentre M83 and M93/p Hardware Maintenance Manual