Channel Mode Message - Kawai MP8II Owner's Manual

Ofrecido por www.electromanuales.com
RPN MSB/LSB
Status 2nd Byte
BnH 65H
BnH 64H
n=MIDI channel number
mm=MSB of the RPN parameter number
ll=LSB of the RPN parameter number
RPN number implemented in MP8II are the followings
RPN # Data
MSB LSB MSB LSB
00H 00H mmH llH
00H 01H mmH llH
7fH 7fH -- --
Program Change
Status 2nd Byte
CnH ppH
n=MIDI channel number
pp=Program number
After Touch
Status 2nd Byte
DnH ppH
n=MIDI channel number
pp=Value
*Sending only when EXP CC#=AFT
Pitch Bend Change
Status 2nd Byte
EnH llH
n=MIDI channel number
mm,ll=Pitch bend value

2.2 Channel Mode Message

MONO
Status 2nd Byte
BnH 7eH
n=MIDI channel number
mm=mono number
POLY
Status 2nd Byte
BnH 7fH
n=MIDI channel number
3rd Byte
mmH
llH
:0H-fH(ch.1~ch.16)
Function & Range
Pitch bend sensitivity
mm:00H-0cH(0~12 [half tone]), ll:00H
Master fine tuning
mm,ll:20 00H - 40 00H - 60 00 (-8192x50/8192 ~ 0 ~+8192x50/8192 [cent])
RPN NULL
:0H-fH(ch.1 ~ ch.16)
:00H - 7fH
:0H-fH(ch.1 ~ ch.16)
:00H - 7fH
3rd Byte
mmH
:0H-fH(ch.1 ~ ch.16)
:00 00 - 7f 7fH(-8192~0~+8192) Default = 40 00H(center)
3rd Byte
mmH
:0H-fH(ch.1 ~ ch.16)
:01H(M=1)
3rd Byte
00H
:0H-fH(ch.1 ~ ch.16)
68
Default=02H
Default = 00H
Default = 00H