Table of Contents
Advertisement
Ofrecido por www.electromanuales.com
UPPER
SECOND
1
1
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
The transmitted program number is shown in the display.
You can also send program change numbers by using VALUE buttons.
Note:
Full program change numbers including bank numbers can be transmitted by
setting them in MENU and saving it as a SETUP. See page35 for details.
2.9 Selecting a SETUP
The MP8II offers 256 preset combinations of the panel settings called SETUPs.
To select a SETUP, press the SETUP button. Now the SOUND SELECT buttons
are used to select a SETUP. Use a combination of the numbers in the upper,
second and third rows to select a desired SETUP. The display will show the
selected SETUP name.
To check the sound (internal) or program number (external) assigned to each
zone, press the ZONE SELECT button. The display briefly shows the assigned
sound name or program number, and then automatically returns to the SETUP
name in a few seconds.
If you hold a ZONE SELECT button for 2 seconds the display will show you the
key range information for that zone. You can also set the key range using the
same procedure that is used in Sound mode.
THIRD
1
A
1
B
1
C
1
D
2
A~D
3
A~D
4
A~D
5
A~D
6
A~D
7
A~D
8
A~D
1~8
A~D
1~8
A~D
1~8
A~D
1~8
A~D
1~8
A~D
1~8
A~D
1~8
A~D
20
PROG#:MSB-LSB
001:000-000
002:000-000
003:000-000
004:000-000
005:000-000 ~ 008:000-000
009:000-000 ~ 012:000-000
013:000-000 ~ 016:000-000
017:000-000 ~ 020:000-000
021:000-000 ~ 024:000-000
025:000-000 ~ 028:000-000
029:000-000 ~ 032:000-000
033:000-000 ~ 064:000-000
065:000-000 ~ 096:000-000
097:000-000 ~ 128:000-000
001:000-001 ~ 032:000-001
033:000-001 ~ 064:000-001
065:000-001 ~ 096:000-001
097:000-001 ~ 128:000-001
Advertisement
Table of Contents
