Kodak Easyshare M320 Extended User Manual page 47

Status
Battery life is short
You cannot take a
picture
Memory card not
recognized or camera
freezes with card
Cannot find the
desired picture/video
Computer/connectivity problems
Status
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device
Computer does not
communicate with
the camera
www.kodak.com/go/support
Solution
■
Make sure the correct battery type is installed (see
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery (see
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way (see
■
Insert a new or charged battery (see
■
Memory is full. Transfer pictures to the computer (see
delete pictures (see
■
Card may be corrupted. Format the card in the camera
page 29).
■
Use another memory card. Only SD or SDHC Cards are supported.
■
To view pictures on a card or in internal memory,
Solution
■
See Help in EASYSHARE Software.
■
Adjust the camera Video Out setting to NTSC or PAL
page 29).
■
Make sure the external device settings are correct. (See the
device's user's guide).
■
Make sure the battery is charged and installed correctly (see
page 1).
■
Turn on the camera.
■
Make sure the USB cable model U-8 is connected to the camera
and the computer (see
■
Make sure EASYSHARE Software is installed (see
page
page
page 13), or insert another card.
page 33).
Troubleshooting
page 51).
1).
page 5).
1).
page 32),
(see
see page 12.
(see
page 32).
41