Picture Quality Problems - Kodak EASYSHARE ZD710 User Manual

Troubleshooting

Picture quality problems

If
Picture is too dark
Picture is too light
Picture is not clear
54
Try one or more of the following
■
Reposition camera for more available light.
■
Use Fill flash (see page
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range
■
To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator turns green, press the Shutter
button completely down to take the picture.
■
If using P, A, or S mode, adjust exposure compensation
page 37).
■
Reposition camera to reduce the amount of available light.
■
Turn flash off (see page
■
Move so that the distance between you and the subject is within the
effective flash range
■
To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator turns green, press the Shutter
button completely down to take the picture.
■
If using P, A, or S mode, adjust exposure compensation
page 37).
■
To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator turns green, press the Shutter
button completely down to take the picture.
■
Clean the lens (see page
■
Make sure camera is not in Close-up/Macro mode if you are more
than 27.6 in. (70 cm) from your subject. (Move further away if you
are using the zoom lens in Close-up/Macro.)
■
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.
9) or change your position so light is not
(see page 9).
9).
(see page 9).
60).
www.kodak.com/go/support
(see
(see