Including Yourself In The Picture - Kodak EZ 200 User Manual

Including Yourself in the Picture

Use the Self-Timer feature to include yourself in a still picture. The Self-Timer
creates a 10-second delay between the time you press the Shutter button and the
time the picture is taken.
The red light flashes and the camera beeps progressively faster for 10 seconds
until the picture is taken.
The picture count on the LCD increases by one.
If the camera beeps a low, double tone and does not take a picture, make sure
the focus ring is set to the
A low, double tone could also indicate a low light condition. See page 46 in
the Troubleshooting section.
Chapter 3
Press the Mode button until the
1
LCD.
Quality is always set to
Timer mode.
2 Set the focus ring to the
position.
3 Place the camera on a flat steady
surface, or use the camera base or a
tripod.
4 Compose the picture, then press the
Shutter button completely down.
position (see page 12).
15
s
icon are displayed in the
in Self-