Table of Contents
Advertisement
Troubleshooting
If
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Shutter button
does not work.
Slide show does
not run on external
video device.
Picture is too light.
Picture is not clear.
48
Try one or more of the following
■
Transfer the picture to the computer
card or internal memory
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■
Take another picture. If screen is still blue or black, visit
www.kodak.com/go/z8612support
Troubleshooting and Repairs.
■
Turn on the camera
■
Wait until the Image Storage icon stops blinking red before attempting
to take another picture.
■
Transfer pictures to the computer
the camera
(page
or insert a card with available memory
■
If problem persists, visit
Interactive Troubleshooting and Repairs.
■
Adjust the camera Video Out setting (NTSC or PAL,
■
See the external device's user's guide.
■
When using the flash, move so there is at least 2 ft (0.6 m) between
the camera and the subject.
■
Decrease Exposure Compensation
■
Clean the lens
(see page
■
Make sure your camera is not in Close-up mode.
■
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■
Place the camera on a flat, steady surface or use a tripod.
(see page
(see page
34).
and select Interactive
(see page
2).
(see page
17), switch image storage locations
www.kodak.com/go/z8612support
(see page
59).
www.kodak.com/go/support
43), then format the
43), delete pictures from
(see page
(page
3).
see page
37).
32),
and select
34).
Hide quick links:
Advertisement
Table of Contents
