Installing The Driver For An Hba Card Or A Cna Card; Installing The Driver For The Qle2672, 2-Port Hba Card; Installing The Driver For The Lsi 9286Cv-8E Hba Card - Lenovo ThinkServer RD550 Operating System Installation Manual

Installing the driver for an HBA card or a CNA card

This topic provides instructions on installing drivers for the following cards:
• LPe16002B HBA card
• 2x FC 16G ports MEZZ
• 4x FC 8G ports MEZZ
• Dual port 10G SFP+ Ports MeZZ
• 4x10GbE DP/DQ SFP+ Ports MeZZ
• OCe14102 and Oce14401 CNA cards for FCoE, iSCSI, and NIC
To install the driver for the card, do the following:
1. Download the driver for the card from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. Then, copy the folder to your USB storage device and connect the USB storage device to
your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /elx-lpfc-dd-sles11sp-10.2.185.0
./elx_lpfc_install.sh
Note: In the command lines, elx-lpfc-dd-sles11sp-10.2.185.0 represents the name of the folder that
the drive is stored. elx_lpfc_install.sh represents the driver name. Use the corresponding file name
on your server.
4. Restart your server.

Installing the driver for the QLE2672, 2-port HBA card

To install the driver for the QLE2672, 2-port HBA card, do the following:
1. Download the driver for the QLE2672, 2-port HBA card from the Lenovo Web site. If the driver is a
compressed file, unzip it to a folder. Then, copy the folder to your USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /driver
./extras/build.sh install
Note: In the command lines, driver represents the name of the folder. Use the corresponding file
name on your server.
4. Restart your server.

Installing the driver for the LSI 9286CV-8e HBA card

To install the driver for the LSI 9286CV-8e HBA card, do the following:
1. Download the corresponding driver for the RAID card from the Lenovo Web site. If the driver is a
compressed file, unzip it to a folder. Then, copy the folder to your USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
.
Chapter 4 Installing drivers
41