Power Cord; Rewinding The Power Cord - Miele S 7000 Operating Instructions Manual

The illustrations referred to in the text
are shown on the fold-out pages at the
end of these operating instructions.
Before the first use
Assembly (see fig. 1)
^ Put the vacuum cleaner in an upright
position.
^ Push the handle down into the body
of the vacuum cleaner until it
engages (see illustration).
Included accessories (see fig. 2)
The following accessories are mounted
on the rear of the vacuum cleaner.
a Upholstery tool
b Crevice nozzle, 12" (300 mm)
c Dust brush with natural bristles
Attach the accessory you wish to use to
the handle on the vacuum hose or the
telescopic wand.
Upholstery tool (see fig. 3)
For cleaning upholstery, mattresses,
cushions, draperies, etc.
Crevice nozzle, 12" (300 mm)
(see fig. 4)
For cleaning folds, crevices, corners
and tight spaces.
Dust brush with natural bristles
(see fig. 5)
For cleaning moldings, ornate and
carved articles, delicate items, etc.
The brush head can be turned to attain
the optimal cleaning position.
Use
Power cord (see fig. 6)
The lower cord hook can be rotated.
^ Rotate the hook upward to release
the power cord.
Rewinding the power cord (see fig. 7)
When the vacuum cleaner is not in use,
the power cord can be wound around
the two cord hooks.
^ To prevent the cord from unwinding
press it into the locking groove of the
plug (see insert).
Plug in the vacuum cleaner (see fig. 8)
^ Guide the power cord through the
notch at the side and over the upper
cord hook (see illustration).
This will keep the cord in an optimal
position so that it will not interfere with
vacuuming. It also keeps the power
cord from becoming caught in the
handle.
en
9