Nokia 9110 Options Manual page 5

3. Printing from Nokia 9110 Communicator
To make your first test print, select Notes application and write a note with a few words. Ensure
that a battery is connected correctly inside GA935-N – check the instructions supplied with
GA935-N. Replace the battery if flat.
1. check the printer is on-line, and that paper is loaded. Connect GA935-N to your printer
Centronics port, and cable DLR-2 supplied with your communicator to GA935-N.
GA
GA935-N
DLR-2
2. with the note still open, press the Menu button at the top left of your communicator display.
3. select the Print option from the menu on the communicator
4. if needed select Printers option and Select a different driver. Press Start to begin printing
You need only repeat these steps to print now that the communicator is configured.
Copyright © 1995 – 1999 Nokia. All right reserved.
5(6)