Installing The Media Board; Removing The Power-Connector Port - Dell Latitude E643 Owner's Manual

Installing the Media Board

1. Place the media board in its compartment.
2. Tighten the screws to secure the media board.
3. Connect the media board cable to the system board.
4. Install:
a) palmrest
b) display assembly
c) keyboard
d) keyboard trim
e) bluetooth card
f) hard drive
g) base cover
h) battery
5. Follow the procedures in

Removing the Power-Connector Port

1. Follow the procedures in
2. Remove:
a) battery
b) base cover
3. Disconnect the power-connector cable from the system board.
4. Remove the screw that secures the power-connector bracket to the computer.
After Working Inside Your Computer .
Before Working Inside Your Computer .
31