Advertisement
Register the wireless mic
You should register your new wireless mic to the base unit
by following the instructions, as mentioned below.
To register the wireless mic
As part of this process, all existing, broken, or misplaced
wireless mics will be deregistered first. Then, the base unit
will re-register the four wireless mics that are placed on
the charging cradles.
Before registration, unplug the telephone line cord from
the wall jack to make sure there are no incoming calls
during registration.
1.
Gather the new wireless mic together with the other
three wireless mics that are to be registered, then
place them on the charging cradles. Registration has
not yet started.
2.
Enter
use, then press
all wireless mics on cradle, then press 'SELECT'.
3.
Make sure all the four wireless mics are on the
charging cradles, and then press
enter the deregistration mode, and the screen displays
Processing...
Registration starts after deregistration completed. The
screen displays Registering... 1 2 3 4. The number X
blinks while registering the X-th wireless mic. You hear a
confirmation tone when each wireless mic is registered.
When all the four wireless mic are registered, the base unit
displays Registration done.
331734 on the base unit when it is not in
. The screen displays Please place
. The wireless mics
Advertisement
