Using The Flash - Kodak EASYSHARE C142 Extended User Manual

Taking pictures/videos

Using the flash

Press the Flash button repeatedly until the LCD displays the desired flash mode.
Flash modes
Auto
Fill (Flash On)
Red-eye Preflash
Reduction
Choose a setting
in the Setup
Digital
menu, page 32.
Correction
Off
8
Flash fires
When the lighting conditions require it.
Every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is "backlit"
(when the light is behind the subject).
NOTE: (Not available in Smart Capture mode.)
The flash fires before the picture is taken to reduce the chance
of red-eye.
The camera digitally corrects red-eye after a picture is taken.
(Processing time after taking a picture may increase.)
NOTE: When using digital correction, image processing takes longer
than when using preflash.
Never
www.kodak.com/go/support