Kodak DX3600 User Manual page 76

Camera
Problem
Picture is too light. The flash is not needed. Change to Auto flash
Stored pictures are
damaged.
Pictures remaining
number does not
decrease after
taking a picture.
Picture is not clear. The lens is dirty.
68
Chapter 9
Cause
The subject is too close
when the flash was used.
The light sensor is
covered.
The Picture Card was
removed when the
viewfinder light was
blinking.
Picture does not take up
sufficient space to
decrease the picture
remaining number.
Subject too close when
taking picture.
Subject or the camera
moved while the picture
was taken.
The subject is too far
away for the flash to be
effective.
Solution
(page 21).
Move so there is at least 1.6
ft (0.50 m) between the
camera and the subject.
Hold the camera so your
hands or other objects do
not cover the light sensor.
Make sure the Picture Card
access light is not blinking
before removing the card.
The camera is operating
normally. Continue taking
pictures.
Clean the lens (page
Move so there is at least 1.6
ft (0.5 m) between the
camera and the subject.
Hold the camera steady
while taking the picture.
Move so there is no more
than 7.5 ft (2.3 m) between
the camera and the subject.
82).