Kodak EASYSHARE DX3215 User Manual page 59

Camera
Problem
Picture is not clear. The lens is dirty.
Slide show does
not run on external
video device.
Chapter 8
Cause
Subject too close when
taking picture.
Macro mode is active
and subject is too far
away.
Subject or the camera
moved while the picture
was taken.
Not enough light
The subject is too far
away for the flash to be
effective.
Video Out setting is
incorrect.
External device is set
incorrectly.
Solution
Clean the lens (page
Move so there is at least 2.5
feet (0.8 m) between the
camera and the subject.
Change setting (page
move closer to subject.
Hold the camera steady or
use a tripod (page
taking the picture.
Turn on the flash
Move so there is no more
than 7.9 feet (2.4 m)
between the camera and the
subject.
Adjust the camera Video Out
setting (NTSC or PAL,
page 23).
Refer to the external device's
user's guide.
63).
22) or
43) while
(page 14).
49