Table of Contents
Advertisement
Problem
Cause
Pictures/Videos are
Not enough light
noisy or grainy
Viewfinder image has a
In extreme low light or
strange coloring
bright light, or changing
lighting conditions, the
Auto White Balance can
fail to provide the best
results.
Viewfinder image is too
When moving the
light or too dark
camera between extreme
low light and extreme
bright light, the Auto
Exposure may fail to
provide the best results.
Solution
Increase the light on the
subject.
Select a High sharpness (low
frame rate) on the "Video
Settings" window.
On the PictureWorks Live
"Camera Setup" window, set
the Shutter Speed to Normal to
allow for slower shutter speeds
for taking pictures and videos
indoors.
Select a Finished Size for the
pictures or videos which is
smaller than the maximum
available.
If the Auto White Balance does
not correct itself within 30
seconds, adjust the Hue slider
on the "Video Settings"
window to correct the colors.
Click on Restore Defaults on
the PictureWorks Live
"Camera Setup" window
(Exposure and Color tab). This
will reset the color balance
settings.
Select one of the preset color
balance settings (incandescent,
fluorescent, or daylight).
Adjust the Hue slider to
provide the best color.
If the Auto Exposure does not
correct itself within 30 seconds,
adjust the exposure manually by
adjusting the brightness slider on
the "Video Settings" window. (To
return to Auto Exposure mode,
click on the Auto Exposure check
box.)
5
5-7
Advertisement
Table of Contents
