Advertisement
Enseo Set Top Box Operation
Your TV may have come equipped with an optional Enseo set top box for hospitality Video on
Demand (VOD) support. For models equipped with an Enseo set top box, please refer to the
following.
Enseo Set Top Box Installation:
Refer to the figure and the steps below to install the Enseo set top box to the unit:
1. Open the back cover on the left rear panel of the unit.
2. Carefully insert the bracket into the appropriately sized cavity on the back of the TV and lock it
using the screws.
3. Carefully insert the Enseo set top box into the appropriately sized cavity on the bracket and lock
with the screws.
4. Plug one end of the communication cord into the PPV jack on the
5. Plug the other end of the communication cord into the RJ-11 jack on the unit. The television has
are two RJ-11 jacks with the same functionality, one on the left rear panel and the other on the
right rear panel; either can be used.
6. Plug one end of the power supply cord into the DC IN jack on the
7. Plug the other end of the power supply cord into the either of the DC OUT jacks on the unit.
8. Close the back cover.
Note: Before installing the Enseo Set Top Box, make sure that the television is unplugged
and powered off.
- 6 -
Enseo
set top box.
Enseo
set top box.
Advertisement
