Hitachi SK-HD1500-S2 Operating Instructions Manual page 21

Facility names and functions E
INCOM PGM 1/2 level
Controls the receiving sound volume of the
program.
INCOM 1/2 intercom level
Controls the receiving sound volume of the
intercom.
INCOM 1/2 TALK ON/OFF switch
Intercom microphone can be switched on/off.
Upper: REAR MIC mode
Intercom microphone
Intercom receive level can be adjusted
with E7.
Middle: OFF mode
Intercom microphone
switched off. Intercom receive level can be
adjusted with E7.
Lower: FRONT MIC mode
Intercom microphone works while C5. is
pressed. Intercom receive level can be
adjusted with C6.
This switch is used to select the PD or ENG
input of the external intercom system to be
connected to the CCU rear side.
(XLR 5 pin)
Intercom headset can be connected.
Power for script lamp. 12V/maximum 1.0A can be
always works.
supplied.
This connector can be used for controlling
intercom TALK ON/OFF. Also RET1 and
is completely
RET2 can be switched on/off.
10
E6
E7
E8
E9
E10
INCOM 1/2 PD/ENG select switch
INTERCOM 1 / INTERCOM 2 connector
SCRIPT connector
RET CONT connector
E6
E7
E9
E8
E12
E11