Table of Contents
Advertisement
Facility names and functions C
C1
MIC connector (XLR, 3pin)
Connector for microphone.
The
phantom power (DC+48V) can be
supplied to front microphone from camera
menu. (Refer to page 59.)
LENS connector (12 pin)
Connector for lens cable.
SHUTTER switch
Set to on to use the electronic shutter. At the
SEL position, the shutter speed and mode are
changed in the range set beforehand at the
setting menu.
AUTO W/B BAL switch
AWB: AWB(Automatic White Balance) can be
executed by lifting up the switch.
Please set WHITE BAL switch D7 to A
or B before executing AWB.
ABB: ABB(Automatic Black Balance) can be
executed by pushing down the switch.
C2
C5
INCOM MIC on/off button
Intercom microphone can be used while
pressing this button when switch E8 on camera
adaptor shown page 10 is set to "FRONT".
INCOM LEVEL control
The intercom level can be adjusted when the
INCOM 1/2 TALK ON/OFF switch E8 on
camera adaptor shown page 10 is set to
" FRONT".
MENU SELECT knob/button
On screen menu can be operated.
7
C3
C4
C6
C7
Advertisement
Table of Contents
