Kodak DC5000 User Manual page 84

Camera
Problem
Picture is too light.
Stored pictures are damaged.
Picture is black and white,
sepia toned, or has too much
contrast.
76
Cause
The flash is not
needed.
The subject is too
close when the flash
was used.
The light sensor is
covered.
The Exposure
Compensation is set
incorrectly.
The camera memory
card was removed
when the Ready light
was blinking.
The Effects setting is
set incorrectly.
Solution
Change to Auto flash.
See page 15. Check
the flash default
setting. See page 51.
Move so there is at
least 1.6 ft (0.5 m)
between the camera
and the subject.
Hold the camera so
your hands or other
objects do not cover
the light sensor.
Decrease the Exposure
Compensation. See
page 22. Check the
Exposure
Compensation default
setting. See page 53.
Make sure the Ready
light is not blinking
before removing the
card.
Change the Effects
setting to No Effects.
See page 24. Check
the Effects default
setting. See page 54.