Table of Contents
Advertisement
Connection with Rear View Camera
Note:
¡ Refer to the operating instructions for the connected devices, in addition.
!0 Power
Connector
Reverse Lead
(Violet/white stripe)
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead
must be connected.
Connect the reverse lead (violet/white stripe) to the posi-
tive (+) lead of the reverse lamp (the lamp with a clear
lens that lights when the transmission gear is shifted into
the reverse position).
Note:
¡Connect the reverse lead after cutting the terminal at
the end.
¡Use a Reverse Extension Cord (option) if needed.
CQ-VD5005W
(Rear)
Rear View Camera
(CY-RC50KW)
CAMERA IN
Camera Input Terminal
(Yellow)
Reverse lamp
Camera Input
RCA Cord
(Video)
(Yellow)
Clip connector
(Commercialized product)
Rear View Camera
Control Unit
(Video)
(Yellow)
Battery
Car chassis
P
Transmission gear
R
N
D
2
L
Check the reverse lamp.
Take it out of the back of
the tail lamp mount.
CQ-VD5005W
12
13
Advertisement
Table of Contents
