AT&T SB67128 User Manual
  1. Manuals
  2. Brands
  3. AT&T Manuals
  4. Repeater
  5. DECT 6.0 SB67128
  6. User manual
AT&T SB67128 User Manual

AT&T SB67128 User Manual

Dect 6.0 repeater
Hide thumbs Also See for SB67128:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
http://www.ochimp.com/
SB67128 DECT 6.0
Repeater
This manual contains information about
this product's installation and operation.
Please also read Part 1 - Important
product information.
For customer service or product
information, visit our website at
www.telephones.att.com
1 (888) 915-2007.
http://www.ochimp.com/
For More Info
Click Here ===>
or call
In Canada, dial
User's manual
1 (866) 288-4268.
Part 2

Advertisement

Table of Contents
loading

Related Manuals for AT&T SB67128

Summary of Contents for AT&T SB67128

  • Page 1 For More Info Click Here ===> User’s manual Part 2 SB67128 DECT 6.0 Repeater This manual contains information about this product’s installation and operation. Please also read Part 1 - Important product information. For customer service or product information, visit our website at www.telephones.att.com...

  • Page 2: Before You Install

    http://www.ochimp.com/ Before you install Parts list • �B6��2� DECT 6.0 repeater • Power adapter • Part � Important product information • Part 2 User’s manual • Package of screws For More Info Click Here ===> Use only the power adapter supplied with this product. To obtain a www.telephones.att.com replacement, visit our website at 1 (888) 915-2007.
  • Page 3 http://www.ochimp.com/ About the repeater You can use a repeater to extend the operating range for the AT&T �B6���� DECT 6.0 4-line corded/cordless telephone system to cover areas where the signal is very weak or not available. The repeater extends the range in all directions, even going around certain barriers. The telephone base, cordless handsets and repeaters are linked through wireless connections.
  • Page 4 http://www.ochimp.com/ Registration You should register your repeaters to the telephone base before choosing locations for them in the building. NOTE: You can register a repeater to an �B6���� telephone base without deregistering it from a previous telephone base. New registrations overwrite any previous repeater registrations.
  • Page 5 http://www.ochimp.com/ Registration STATUS indicator light Slow flash The repeater is powered on and in idle mode waiting to be re- registered. -OR- The registered repeater is not connected to the telephone base. -OR- Your telephone base has no power. Quick flash The repeater is registering to the telephone base.

  • Page 6: Installation

    http://www.ochimp.com/ Installation After you have plugged in your repeaters in the locations you think are best, place a call from a cordless handset (AT&T �B6��0�) and while talking, move around the building to test the reception. You may want to adjust the position of repeaters to receive the best reception. Plug the small end of the power adapter into the power jack on the front of the repeater and route the cord through the slot on the bottom of the repeater.
  • Page 7 http://www.ochimp.com/ Installation You can place the repeater on a tabletop. You can install your repeater on a wall or other object with the provided screws. Please use the recommended placement and installation tips as follows: • The antennas needs to be in a high location (not on the floor or under a desk) for reception.
  • Page 8 http://www.ochimp.com/ Installation If you want to install your repeater on a wall or other object, use the provided screws. Professional assistance may be required to install screws on the wall. Then plug the large end of the power adapter into a nearby electrical wall outlet and raise the antennas.

  • Page 9: Troubleshooting

    http://www.ochimp.com/ Troubleshooting If you have difficulty operating this repeater, try the suggestions below. To contact Customer �ervice, purchase accessories or obtain www.telephones.att.com replacement parts, visit our website at 1 (888) 915-2007 1 (866) 288-4268 or call . In Canada, dial Please retain your receipt as your proof of purchase.
  • Page 10 http://www.ochimp.com/ Troubleshooting • First try all the suggestions on the previous My repeater page. cannot register to my telephone • Make sure your telephone base is model AT&T base. �B6���� DECT 6.0 4-line corded/cordless telephone system. • Carefully follow the registration instructions on pages 3 of this user’s manual.

  • Page 11: General Product Care

    http://www.ochimp.com/ General product care To keep the repeater working and looking good, follow these guidelines: • Avoid putting it near appliances and devices that generate electrical noise (motors, fluorescent lights, etc.) • DO NOT expose it to direct sunlight or moisture. •...

  • Page 12: Technical Specifications

    http://www.ochimp.com/ Technical specifications RF frequency band �92�.536 MHz — �92�.44� MHz Channels Operating temperature 32°F — �22°F 0°C — 50°C Repeater voltage ��0 — �20 Vrms (AC voltage, 60Hz) Repeater voltage 6VDC @600mA (AC adapter output) Repeater operating range This repeater operates within the maximum power allowed by the Federal Communications Commission (FCC).

Table of Contents