Problem
Picture is too
light.
Camera freezes
up when a card is
inserted or
removed.
Kodak CRV3
lithium battery
does not fit in the
camera.
76
Chapter 10
Cause
The flash is not needed. Change to Auto flash or Flash Off
The subject was too
close for flash.
The light sensor is
covered.
Too much light.
Auto exposure was not
achieved.
Camera detected an
error when the card
was inserted or
removed.
Battery is not oriented
correctly.
Solution
(page
19).
Move so there is at least 2 ft
(0.6 m) between camera and
subject.
Hold the camera so your hands or
other objects do not cover the light
sensor
(page
i).
Decrease Exposure Compensation
(page
24).
To take the best possible pictures,
press the Shutter button
half-way and hold. When the
ready light glows green, press the
Shutter button the rest of the
way down to take the picture.
Turn the camera off, then back on.
Make sure the camera is turned off
before inserting or removing a
card.
See
page
4.