Advertisement
Active input changes the
impedance to the first input tube
to better match active pickups.
Passive input for matching the
impedance for passive pickups.
CHANNEL SELECTOR SWITCH:
This switches between channel 1 &
channel two - performs same function as
first button of footswtich
GAIN: Overall gain control for clean channel. Use this control
along with the volume for ranges from crystal clean to slight
break up.
BRIGHT: High frequency boost that becomes less active as
GAIN control is increased.
VOLUME: Channel 2 volume control to balance output between
channel 1. It affects the SEND level of the FX LOOP.
BASS: Passive interactive low frequency equalization for
channel 2.
MIDDLE: Passive interactive midrange frequency equalization
for channel 2.
TREBLE: Passive interactive high frequency equalization for
channel 2.
SHIFT: 3 way switch that changes the voicing of the clean
INPUT JACKS:
Front Panel Controls
!
6IRTH: Frequency selective gain control for bass
6RIND: Frequency selective gain control for treble
6AIN: Overall gain control with the sum of the LF and HF gains
SWEEP:Changes the frequency points of the tone stack creating shift in tonal character.
VOLUME: Channel 1 volume control to balance output between channel 2. It affects the
send level of the FX LOOP. Proper channel 1 volume setting to start to the 3 o'clock position.
BASS: Passive interactive low frequency equalization for channel 1.
MIDDLE: Passive interactive midrange frequency equalization for channel 1.
TREBLE: Passive interactive high frequency equalization for channel 1.
KILL: Preset upper mids gain boost for channel 1. Full frequency boost for channel 2.
Function is engaged via KILL switch or footswitch jack CH/BOOST activating KILL LED.
DEPTH: Power amp control of low frequency interaction between amplifier and
speakers.
PRESENCE: Power amp control of high frequency variable feedback.
MASTER: Controls the overall output of the amplifier post EQ
STANDBY: Breaks the output tubes cathodes only. Speaker Emulated output still
functions in STANDBY.
POWER: On/off for the mains.
Advertisement
