[Trigger 1/2 Setting]; [Startup Logo] [On]; [Hdmi Signal Level] *1; Trigger 1 Setting - Panasonic PT-AE8000U Operating Instructions Manual

[TRIGGER 1/2 SETTING]

You can set the function for each trigger terminal.
The trigger terminals for this projector are used as
both the input/output terminal for the trigger function
and the output terminal for the external 3D IR
Transmitter (optional accessory). This is selected with
a menu.
Attention
z You can connect a maximum of two external 3D IR
Transmitter (optional accessory).
z Make sure the <MAIN POWER> switch of the projector
is turned <OFF> before a cable is connected to or
disconnected from a trigger terminal.
■ [OUTPUT]
In conjunction with projector operation set in the [TRIGGER
1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger
output signal is sent to an external device with a trigger
terminal to enable control.
■ [INPUT]
Receipt of a trigger input signal from an external device
enables control of projector operation setup in the
[TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu.
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
1) Use the ▲▼ buttons to select [TRIGGER
1 SETTING] or [TRIGGER 2 SETTING] and
press the <ENTER> button.
z The [TRIGGER SETTING] menu is displayed.
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
Downloaded From projector-manual.com Panasonic Manuals
ON-SCREEN DISPLAY
BACK COLOR

BLUE

STARTUP LOGO ON
AUTO SEARCH ON
HDMI SIGNAL LEVEL

NORMAL

FRAME RESPONSE NORMAL
PROJECTION METHOD FRONT/DESK

TRIGGER 1 SETTING

OFF

TRIGGER 2 SETTING

OFF
SLEEP OFF
OFF

HIGH ALTITUDE MODE

LAMP POWER NORMAL

FUNCTION BUTTON

VIERA LINK SETTINGS

TRIGGER 1 SETTING
OFF 3D SHUTTER OUT
OUTPUT
POWER ON SELECT 4:3 ASPECT
SELECT LENS MEMORY 1 SELECT 16:9 ASPECT
SELECT LENS MEMORY 2 SELECT S16:9 ASPECT
SELECT LENS MEMORY 3 SELECT JUST ASPECT
SELECT LENS MEMORY 4 SELECT ZOOM ASPECT
SELECT LENS MEMORY 5 SELECT H-FIT ASPECT
SELECT LENS MEMORY 6 SELECT V-FIT ASPECT
BLANK RS-232C COMMAND LINK
DELAY TIME 0 SEC.
INPUT
POWER ON/OFF BLANK
2) Press the ▲▼◄► buttons to select
the input/output function and press the
<ENTER> button.
z Function settings

[OFF]

[3D SHUTTER
OUT]

Note

z Read the operating instructions for the external 3D IR
Transmitter (optional accessory) when using a 3D IR
Transmitter.
z Output
1/2
[POWER ON]
[SELECT LENS
MEMORY 1]
[SELECT LENS
MEMORY 2]
[SELECT LENS
MEMORY 3]
[SELECT LENS
MEMORY 4]
[SELECT LENS
MEMORY 5]
[SELECT LENS
MEMORY 6]
[BLANK]
When the item which is set in the [TRIGGER
1 SETTING]/[TRIGGER 2 SETTING] menu is
chosen or executed in the projector, 12 V is output
from a trigger terminal.
Note
z When [AUTO] is selected in the [ASPECT] menu of
[POSITION], video is automatically displayed using either
4:3 or 16:9 aspect ratio depending on the input signal,
so if this aspect ratio matches the settings made in
[TRIGGER 1 SETTINGS] or [TRIGGER 2 SETTINGS]
12 V is output.
[OPTION] menu
Unable to transmit the
trigger output signal. Does
not function even if trigger
input signal is received.
(Trigger input signal can
be received.)
An external 3D IR
Transmitter (optional
accessory) will not
operate even if
connected.
Select this for connecting
and use of an external 3D
IR Transmitter (optional
accessory).
[SELECT 4:3
ASPECT]
[SELECT 16:9
ASPECT]
[SELECT S16:9
ASPECT]
[SELECT JUST
ASPECT]
[SELECT ZOOM
ASPECT]
[SELECT H-FIT
ASPECT]
[SELECT V-FIT
ASPECT]
[RS-232C COMMAND
LINK]
ENGLISH - 79