Table of Contents
Advertisement
Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
160-GB, 5400-rpm
120-GB, 5400-rpm
80-GB, 5400-rpm
Before removing the hard drive, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the hard drive:
Position the computer with the front toward you.
1.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the
2.
computer.
Lift the left side of the hard drive cover (2), swing it to right, and remove the cover. The hard drive
3.
cover is included in the Door/Cover Kit, spare part number 417074-001.
Remove the two black Phillips PM2.5×4.0 screws (1) that secure the hard drive to the computer.
4.
ENWW
Battery on page
36).
Spare part number
452060-001
452059-001
452058-001
Component replacement procedures
37
Advertisement
Table of Contents
