Troubleshooting
Status
You cannot take a
picture
Memory card not
recognized or camera
freezes with card
Computer/connectivity problems
Status
Slide Show does not
run on an external
video device
Computer does not
communicate with
the camera
Direct printing (PICTBRIDGE enabled Printer) problems
Status
Cannot print to a
PICTBRIDGE Printer
42
Solution
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way
■
Insert new/charged batteries in the correct orientation
page
1).
■
When inserting a memory card, push it in until it clicks
page
3).
■
Memory is full. Transfer pictures to the computer
delete pictures
■
Use a card reader to check the card on a computer. If it's
corrupted, format the card in the camera
■
Try another SD or SDHC Card.
Solution
■
Adjust the camera Video Out setting to NTSC or PAL
page
34).
■
Make sure the external device settings are correct. (See the
device's user guide).
■
Turn off the camera, then turn it back on.
■
Make sure fresh batteries are installed correctly
■
Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer
turn on the camera.
■
See KODAK Software Help at www.kodak.com/go/camerasw.
Solution
■
In the Setup menu, change the Computer Connection setting to
Other Application
(see page
20), or insert another card.
(see page
34).
www.kodak.com/go/support
(see page
4).
(see
(see
(see page
(see page
35).
(see
(see page
1).
(see page
36). Then
36),