Lennox Hearth Products LSS-35CN Care And Operation Instructions Manual page 15

2
4
1
1
Align holes on the bottom of log (1) over the
tabs and push down.
3
Align holes at the bottom
of log (3) over the pins.
Figure 12
LSS-35 LOG PLACEMENT
3
6
2
Align groove at the bottom
of log (2) over the grate and
push it toward the rear.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Log
Number
1
2
7
3
4
5
6
7
Catalog Number for the entire
log set: 35M61
5
4
Align groove at the bottom of
log (4) over the tyne and slide it
backward to touch log (2).
Place log (6) between
90° bend and log (5).
Description
Log, Front/Bottom/Center
Log, Rear
Log, Center
Log, Front/Left
Log, Front/Right
Log, Right
Log, Top/Right
5
Align groove at the
bottom of log (5)
over tyne and slide
forward.
6
Rest log (7) on lower
logs, over the flattened
surfaces of the logs.
7
15