Philips 190CW8FB/00 Service Manual page 61

GENERAL PRODUCT SPECIFICATION(Continued)
Safety
EMI
Ergonomics
Compatibility
* Medical compliance only applies for dedicated models.
3.0 Electrical characteristics
3.1 Interface signals
There are two main display interface input signals (D-sub and DVI-D)
1). D-shell Analog
Input signal: Video, H-sync, V-sync,
Video: 0.7 V p-p, input impedance, 75 ohm
Sync. : Separate sync
Sync on green video 0.3V p-p Negative. (Video 0.7 V p-p Positive)
2). DVI-D Digital
Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)
3.2 Interface
3.2.1 D-Sub Cable
Length.
Connector type.
Pin Assignment:
19 inch LCD Monitor
TYPE
BRAND : PHILIPS
2007-08-01
B, CCIB / CCEE(China), CE(Europe), CSA(Canada),
DEMKO(Nordic), EZU(Czech), FIMKO(Nordic), Gost(Russia),
IEC 950 CB Report, NOM NYCE(Mexico), PSB(Singapore),
SEMKO(Nordic),SISIR CPA(Singapore), TUV(Germany),
UL(USA),
* UL2601-1(NAFTA), EN60601(EU) and IEC60601-1(WW)
C-tick, CE(Europe), FCC(USA), IC(Canada),
VCCI(Japan),BSMI,
*IEC60601-1-2 (EU)
E2000, MPRII(Sweden), Nutek(Sweden), TCO99, TCO03,
TUV/GS, TUV/ERG, EPA, ISO13406-2
PC2001, Windows 2000, Windows 98/Me, Windows XP,
NSTL
TTL level, input impedance 2k2 ohm terminate
H-sync Positive/Negative
V-sync Positive/Negative
Composite sync TTL level, input impedance 2k2 ohm terminate
(Positive/Negative)
: 1.8 M +/- 50 mm
: D-Sub male with DDC-2B pin assignments.
Blue connector thumb-operated jackscrews
:190CW8
2007-08-01
590
5
HUDSON 8 61