Chapter 2. Installing And Using The Touch Case; Installing The Touch Case - Lenovo ThinkPad 10 Touch Case User Manual

Chapter 2. Installing and using the touch case

This chapter provides the following instructions:
• "Installing the touch case" on page 5
• "Carrying or storing the tablet together with the touch case" on page 7
• "Using the touchpad of the touch case" on page 8
• "Cleaning the touch case" on page 9

Installing the touch case

The touch case is especially designed for the ThinkPad 10 tablet models that are not equipped with a smart
card slot. To install the tablet into the touch case, do the following:
Note: Your touch case might look slightly different from the following illustrations.
1. Unfold the touch case. Then align the tablet holder (bottom) with the tablet-fixing groove. The tablet
holder (bottom) is attached to the tablet-fixing groove magnetically.
Note: Ensure that the tablet holder (bottom) is securely seated in the tablet-fixing groove.
Figure 2. Aligning the tablet holder (bottom) with the tablet-fixing groove
© Copyright Lenovo 2014 5