Chapter 2. Installing The Lenovo Usb Port Replicator With Digital Video; Connecting The Port Replicator To Your Notebook Computer; Installing The Device Driver On Windows Operating Systems - Lenovo USB Port Replicator with Digital Video - ThinkPad USB Port Replicator User Manual

Chapter 2. Installing the Lenovo USB Port Replicator with
Digital Video
This chapter provides information on how to connect the port replicator to your notebook computer and
how to install and uninstall the device driver.

Connecting the port replicator to your notebook computer

This section provides instructions on how to connect the port replicator to your notebook computer with
the provided ac power adapter and USB cable.
To connect the port replicator to your notebook computer, do the following:
1. Connect the dc connector of the ac power adapter to the port replicator.
2. Connect the power plug of the ac power adapter to a wall outlet. The power and connection indicator
is on and in amber.
Note: Be sure to correctly connect the port replicator to the ac power adapter. If the port replicator is
not powered on, you will not be able to use the port replicator.
3. Connect the USB B plug of the USB cable to the USB B receptacle connector on the port replicator.
4. Connect the USB A plug of the USB cable to an available USB connector on the notebook computer.
The power and connection indicator turns green.
Note: The port replicator does not power up the notebook computer when it is connected.

Installing the device driver on Windows operating systems

After you have connected the port replicator to your notebook computer, you can install the device driver
on the Software and User Guide CD.
© Copyright Lenovo 2009, 2010
3