Frequency Range And Transmitter Output Level - Shure SLX Wireless Quick Setup Manual

SLX
Working Range 100 m (300 ft)
Line of Sight
Note: Actual range depends on RF signal absorption,
reflection and interference.
Audio Frequency Response 45–15000 Hz
Note: Dependent on microphone type
Total Harmonic Distortion
Ref. ±38 kHz deviation with 1 kHz <0.5%, typical
tone
Dynamic Range
>100 dB, A-weighted
Operating Temperature Range
-18°C (0°F) to +50°C (122°F)
Note: Battery characteristics may limit this range.
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or
positive voltage applied to tip of WA302 phone plug)
produces positive voltage on pin 2 (with respect to
pin 3 of low-impedance output) and the tip of the high
impedance 1/4-inch output.
SLX1
Audio Input Level
Gain Adjustment Range 30 dB
Input Impedance 1 MΩ
RF Output Power 10–30 mW
varies by region
Pin Assignments
TA4M
Dimensions 108mm x 64mm x 19mm (H x W x D)
Weight 81 g (3 oz.), without batteries
Housing galvanized steel
Power Requirements 2 "AA" size alkaline or rechargeable batteries
Battery Life up to 8 hours (alkaline)
SLX2
Maximum Input Level
at 0 dB gain setting:
Gain Adjustment Range
10 dB
RF Output Power
10–30 mW
varies by region
Dimensions
254mm X 51mm dia. (10 X 2in.)
Weight
290 g (10.2oz.) (without batteries)
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 "AA" size alkaline or rechargeable batteries
Battery Life up to 8 hours (alkaline)
gain position
mic: −10 dBV maximum
0dB: +10 dBV maximum
–10dB: +20 dBV maximum
1: ground (cable shield)
2: + 5 V Bias
3: audio
4: Tied through active load
to ground (On instrument
adapter cable, pin 4 floats)
at –10 dB gain
+2 dBV
setting:
–8 dBV
SLX4
Dimensions
Weight
Housing
Sensitivity
Power Requirements
Configuration
Maximum Audio Output Level
Ref. ±38 kHz deviation with 1 kHz
tone
Impedance
Pin Assignments
Image Rejection
Volume Adjustment Range
Frequency Range and Transmitter
Output Level
Band Range
G4 470 to 494 MHz
G4E 470 to 494 MHz
G5 494 to 518 MHz
G5E 494 to 518 MHz
G8 494.200 to 509.825 MHz
H5 518 to 542 MHz
J3 572 to 596 MHz
L4 638 to 662 MHz
L4E 638 to 662 MHz
P4 702 to 726 MHz
R13 794 to 806 MHz
R5 800 to 820 MHz
X4 925 to 932 MHz
S6 838 to 865 MHz
S10 823 to 832 MHz
JB 806 to 810 MHz
R19 794 to 806 MHz
Q4 740 to 752 MHz
K3E 606 to 630 MHz
NOTE:
This Radio equipment is intended for use in musical professional entertainment
and similar applications.
This Radio apparatus may be capable of operating on some frequencies not
authorized in your region. Please contact your national authority to obtain infor-
mation on authorized frequencies and RF power levels for wireless microphone
products.
10
42mm X 197mm X 134mm (H x W x D)
816 g (1 lb 13oz.)
galvanized steel
-105 dBm for 12 dB SINAD, typical
12–18 V DC @ 150 mA, supplied by external power
supply (tip positive)
Impedance balanced
XLR connector:
–13 dBV (into 600 Ω load)
6.35 mm (1/4")
–2 dBV (into 3 kΩ load)
connector:
XLR connector: 200 Ω
6.35 mm (1/4")
1 kΩ
connector:
XLR connector: 1=ground, 2=audio, 3=no
audio
6.35 mm (1/4") Tip=audio, Ring=no audio,
connector: Sleeve=ground
>70 dB, typical
0 dB to -25 dB
Output Power
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
20 mW
20 mW
10 mW
10 mW
10 mW
10 mW
10 mW
10 mW
10 mW