Mounting Positions; Clamp Mounting - Elation Design LED 36 Brick Manual

DESIGN LED 36 BRICK™
power cord to the appropriate wall outlet.
Mounting
The Design LED Brick™ is fully operational in any mounting position, hanging upside-down
from a ceiling, side mounted, or set on a flat level surface, etc. Be sure this fixture is kept at
least 0.5m away from any flammable materials (decoration etc.). When clamp mounting;
always use and install the supplied safety cable as an added safety measure to prevent
accidental damage in the event of a clamp failure. See the image below.

Clamp Mounting

The Design LED Brick™ provides a unique mounting bracket assembly that allows the unit
to stand on flat surface, hang on truss via a clamp, or be used in cluster allow multiple units
to rigged together (see the illustration below). Regardless of the mounting option you choose
©Elation Professional, Los Angeles Ca. 12 www.ElationLighting.com