Bluetooth Reset; Sound Settings - Sony XAV-68BT Operating Instructions Manual

Steering Control
You can operate the unit with buttons on the
steering wheel.
For safety, park your car before making this
setting.
Unit status: Any status
Option Purpose
User To display the instruction and
panel for steering wheel control.
External () To deactivate steering wheel
control.
To use rotary commander
control.
User Defined
This setting is available only when [Steering
Control] is set to [User].
The steering button panel appears.
 Press and hold the button you want to assign
to the steering wheel.
The button on the panel lights up (standby).
 Press and hold the button on the steering
wheel you want to assign the function to.
The button on the panel changes to blue
(registration complete).
 To register other buttons, repeat steps  and
.
Unit status: Any status
Option Purpose
– To display the instruction and
control panel.
Notes
 If an error occurs while registering, all the registered
information is cleared. Restart registration from the
beginning.
 If leave the setting display and reconfigure the
setting, all the registered information is cleared.
Restart registration from the beginning.
 This function may not be available on some vehicles.
For details on the compatibility of your vehicle, visit
the support site on the back page.
Bluetooth Connection
Unit status: Any status
Option Purpose
ON, OFF () To activate the BLUETOOTH
signal.
Bluetooth Device Info
Unit status: Any status
Option Purpose
– To display the device connecting
to the unit by touching [Open].
(Available only when [Bluetooth
Connection] is set to [ON].)

Bluetooth Reset

Unit status: Any status
Option Purpose
– To initialize all BLUETOOTH-
related settings such as pairing
information, call history, preset
dial, history of connected
BLUETOOTH devices, etc.
HOME Key Function (hold 2 sec push)
Unit status: Any status
Option Purpose
Voice, DSPL () To assign the voice command
function or the display menu to
the HOME button.

Sound Settings

Rear/Sub Out
Switches the audio output between the rear
speakers and subwoofer.
Unit status: Any status
Option Purpose
Rear To output audio signals to the
rear speakers (amplifier).
Subwoofer () To output audio signals to the
subwoofer.
17
GB