Alcatel OneTouch 7024R Fierce Quick Start Manual page 4

1�2 Getting started
1�2�1 Set-up
Removing or installing back cover
Caution: DO NOT REMOVE BATTERY, this may result in
injury and will void your warranty� This phone model has a
non-removable battery�
Inserting or removing SIM card
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
To install SIM card, start by sliding the metal SIM card tray to right
unlock position, tray will click and release when unlocked. Place the
SIM card into slot with gold contacts facing downward. Once SIM
card is placed into slot, close metal SIM card tray, then slide tray to
left lock position, tray will click when locked. To remove, please open
the metal SIM card tray and take SIM card out.
Before inserting/removing SIM card, you should ensure the phone is
off, to protect it from corruption or damage.
6
Rav4 7024R USA QG_20140218.indd 6-7
Installing or removing microSD card
To install microSD card, please start by sliding the metal microSD
card tray to right unlock position, tray will click and release when
unlocked. Place microSD card into the slot with the gold contacts
facing downward. Once microSD card is placed into slot, close metal
microSD card tray, then slide tray to left lock position, tray will click
when locked. To remove, please open the metal microSD card tray
and take microSD card out.
Before inserting/removing microSD card, you should ensure the
phone is off, to protect it from corruption or damage. In addition,
regularly removing or inserting the SD card may cause the phone
to restart.
Charging the battery
Caution: DO NOT REMOVE BATTERY, this may result in
injury and will void your warranty� This phone model has a
non-removable battery�
Connect the battery charger to your phone and outlet respectively.
The charging status bar will not display if your battery is
extendly consumed. To reduce power consumption and
energy waste, when battery is fully charged, disconnect your
charger from the plug; switch off Wi-Fi, GPS, Bluetooth or
background-running applications when not in use; reduce the
backlight time, etc.
7
2014/2/25 10:57:58