Using The Framing Marks To Take Pictures; Taking A Video - Kodak EASYSHARE Z1015 IS Extended User Manual

Using the framing marks to take pictures

Framing marks indicate the camera focus area. The camera attempts to focus on
foreground subjects, even if they're not centered in the scene.
1 Press the Shutter button halfway.
If the camera is not focusing on the desired subject, release the Shutter button and
recompose the scene.
2 Press the Shutter button completely down to take the picture.
NOTE: Multiple framing marks may appear when faces are detected. (The primary face gets a yellow
framing mark. To change focus from the selected face to another face, press
marks do not appear in all modes.

Taking a video

1
2 Press the EVF/LCD button for:
• LCD or
• EVF (electronic viewfinder)
3 Press the Shutter button
completely down and release.
To stop recording, press and
release the Shutter button again.
NOTE: After you take a video, the EVF/LCD displays a quickview. To play/pause the video during the
quickview, press OK.
www.kodak.com/go/support
Taking pictures/videos
EVF
LCD
.) Framing
7