Table of Contents
Advertisement
Status
You cannot take a
picture
Memory card not
recognized or camera
freezes with card
Cannot find the
desired picture/video
Computer/connectivity problems
Status
Computer does not
communicate with
the camera
Picture quality problems
Status
Picture is not clear
www.kodak.com/go/support
Solution
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way (see
■
Insert new or charged batteries (see
■
Memory is full. Transfer pictures to the computer (see
delete pictures (see
■
Card may be corrupted. Format the card in the camera
page
35).
■
Use another memory card. Only SD or SDHC Cards are supported.
■
To view pictures on a card or in internal memory,
Solution
■
Make sure the batteries are charged and installed correctly (see
page
2).
■
Turn on the camera.
■
Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (see
■
See KODAK Software Help at www.kodak.com/go/camerasw.
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens (see
■
Make sure the camera is not in Macro mode
more than 27.6 in. (70 cm) from your subject.
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
page
21), or insert another card.
page
46).
Getting help
page
5).
page
2).
page
(see
see page
page
36).
(see page
32) if you are
36),
20.
41
Hide quick links:
Advertisement
Table of Contents
