Location Of Controls - Sony RM-VL900T Operating Instructions Manual

Location of Controls

NOTE
The function of control buttons vary depending on settings/operating modes.
"Table of Preset Functions" (page 48) shows how the Commander generally
operates for each component at preset mode.
These settings can be changed, and some buttons are used specifically in the setup
procedure as described in the following pages.
1 S (set) button
2 Set indicator
3 Component Select buttons
Light or flash during operation.
4 Number buttons/AMP INPUT
select buttons
5 - (1–) button
6 t button
7 / button
8 Player Control buttons or
Fastext buttons
9 Cursor Control & OK buttons
0 MENU button
qa 2 +/– buttons*
qs % button*
qd SYSTEM CONTROL buttons
qf 1 button
qg ENT (enter) (2–) button
qh a button
qj GUIDE button
qk PROGR +/– buttons
ql button
* Note on the 2 +/– and %
buttons
The Commander controls or mutes the
TV's volume when you select a visual
component. The Commander controls
or mutes the amplifier's volume when
you select an audio component.
You can change this setting also
(page 21).
GB
7