Table of Contents
Advertisement
Specifications
p General
Power Supply:
Current consumption:
Maximum Power Output:
Tone adjustment range:
Bass:
Treble:
Power Output:
Suitable Speaker Impedance:
Dimensions (W × H × D):
Weight:
p Front AUX Input
Input impedance:
Maximum input level:
Connector:
Input sensitivity:
p FM Stereo Radio
Frequency Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
Frequency Response:
Alternate Channel Selectivity:
Stereo Separation:
Signal/Noise Ratio:
p AM Radio
Frequency Range:
Usable Sensitivity:
p Weather Band Radio
Frequency Range:
Usable Sensitivity:
Signal/Noise Ratio (40 dB/µV):
Above specifications comply with EIA standards.
Note: Specifications and the design are subject to modification without notice due to improvements in tech-
nology.
12 V DC (11 V-16 V) test Voltage 14.4 V, Negative @ ground
Less than 2.5 A (0.5 W 4-speaker)
37 W × 4 channels at 400 Hz, Volume Control maximum
± 12 dB at 100 Hz
± 12 dB at 10 kHz
18 W per channel into 4 ohms, 40 to 30,000 Hz at 3 % THD
4 Ω
178 × 50 × 160 mm {7" × 1-15/16" × 6-5/16"}
0.9 k {1 lbs. 16 oz.}
10 kΩ
2.0 V
3.5 mm ø stereo mini pin
200 mVrms
87.9 – 107.9 MHz
12 dBf (1.1 µV/ 75 Ω, S/N 30 dB)
17 dBf (1.8 µV/ 75 Ω)
30 – 15,000 Hz ±3 dB
75 dB
35 dB at 1 kHz
70 dB (Mono)
530 kHz – 1 710 kHz
28 dB/µV (25 µV, S/N 20 dB)
162.400 – 162.550 MHz
3 dB/µV (S/N 20 dB)
50 dB
Power Output:
16 W RMS x 4 Channels at 4 Ω and
≤ 1% THD+N
Signal to Noise Ratio:
70 dBA (reference: 1 W into 4 Ω)
17
Advertisement
Table of Contents
