Advertisement
Quick Links
Download this manual
See also:
User Manual
1101 Secure Device Server
Quick Start Guide
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
Support
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
Information
PA 15055-1018 • Web site: www.blackbox.com • E-mail: info@blackbox.com
BLACK BOX
LES1101A-R2
®
Advertisement
Related Manuals for Black Box LES1101A-R2
Summary of Contents for Black Box LES1101A-R2
- Page 1 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Customer FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax Support 724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, Information PA 15055-1018 • Web site: www.blackbox.com • E-mail: info@blackbox.com...
-
Page 2: Trademarks Used In This Manual
• Connect the LES1101A-R2 LAN port to your network. • Connect your serial device to the serial port on the DB9 male connector. • By default, the LES1101A-R2 is configured in RS-232 mode. RS-232, RS-422, and RS-485 are software-selectable. Simply press the button to Reset the unit... - Page 3 1101 Secure Device Server Quick Start Guide The DB9 pinouts for the modes are shown below. DB9 pinouts. Mode RS-232 RS-422 RS-485 — — RX - — TX + — — Figure 1. Reset button. RX + — TX - —...
- Page 4 • Configure the Common Settings (baud rate, parity, data bits, stop bits, and flow control) to match those of the serial device being controlled. • By default, the LES1101A-R2 is configured in RS-232 mode. RS-232, RS-422, and RS-485 are software-selectable. Simply press the button to Reset the unit back to factory default (RS-232 mode).
- Page 5 1101 Secure Device Server Quick Start Guide • You may also wish to set the logging level, which specifies the details of the communications that will be logged and monitored for this serial port. By default, logging is disabled. • Click “Apply.” Step 5: Add new users.
- Page 6 ® devices attached to a remote LES1101A-R2 serial device server. To use PortShare, configure the LES1101A-R2 serial port in console server mode and specify the appropriate protocol to be used (either RFC2117 or RAW). Refer to the provided PortShare Quick Start or the user manual on your CD-ROM for more details.
- Page 7 NOTES Page 7 724-746-5500 | blackbox.com...
- Page 8 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less.