Table of Contents
Advertisement
17
18
19
20
21
1
22
23
2
24
3
25
At the end of the descaling cycle, wash the brew group as described in the
"Weekly cleaning of the brew group" chapter.
The rinse cycles are performed in order to have the circuit cleaned with
a preset amount of water to ensure proper machine performance. If the
water tank is not fi lled up to MAX level, the machine might require three or
more cycles.
When the water tank is empty, remove the water tank, rinse it and fi ll it
up to the MAX level with fresh water. Place it back into the machine.
Empty the container and place it back under the steam/hot water
wand and dispensing spout.
When the amount of water needed for the rinse cycle has been
completely dispensed, this icon on the side is displayed. Press the"
button to quit the descaling cycle.
Press the "
" button to prime the circuit.
The machine now carries out the warm-up and automatic rinse cycle to
prepare for product brewing.
Remove and empty the container.
Empty the drip tray and place it back.
The descaling cycle is now complete.
Remove the small white water fi lter and place back the "INTENZA+"
water fi lter into the water tank if it was installed and the Automatic
Milk Frother.
Note:
ENGLISH
47
47
"
Hide quick links:
Advertisement
Table of Contents
