Storing Caller List Information In The Directory - Panasonic KX-TC1713CB Operating Instructions Manual

PQQX13142ZA-AK-3 01.7.18 8:56 AM y [ W 35
Storing Caller List Information in the
Directory
You can store numbers that are in the Caller List in the directory.
Make sure the unit is in the standby mode.
1 Lift the handset off the base unit and
(›) (‹)
press or
(›) (‹)
2
Press or
caller you want to store in the directory.
EDIT (fl)
Press
≥If the number requires editing, see page 34.
(›) (‹)
3 Press or
directory" , and press
key).
If there is no name information for the
caller, "Enter name" will be
displayed.
a) If a name is not required, press
(Next key) and
b) If a name is required, enter the name
(p. 40). When finished, press
(Next key) and
≥A beep sounds.
≥The display will return to step 2. You can
continue storing other items.
≥To return to the standby mode, press (OFF).
≥You can exit the programming mode any time by pressing (OFF).
≥If the display shows "Directory full" in step 3, the display will return to
step 2. Press (OFF) to exit the list. To erase other stored items from the
directory, see page 45.
≥You cannot store caller information in the directory if a phone number is not
displayed.
≥If the display shows "Save error" or "No link to base Place on
cradle and try again." in step 3, the item cannot be stored in the directory.
Try again from step 1.
to enter the Caller List.
repeatedly to find the
.
to select "Save
EDIT (fl)
(Yes
(›)
EDIT (fl)
(Save key).
(›)
EDIT (fl)
(Save key).
"
10 new callers
1=Directory
4 3
TURNER,CINDY
234-456-7890
11:20A JAN12 a3
1Edit
Save directory
1=Yes
4 3
Edit
1Save directory
1=Yes
4 3
Enter name
=Next
21
4
Enter name
CINDY TURNER
=Next
21
4
CINDY TURNER
2344567890
=Edit
1=Save
3
35