Lighting Instructions - Napoleon TQ285 User Instructions

8

Lighting Instructions

EN
Clip supplied lighting rod
to regulator bracket.
Burner Control
WARNING!
Open lid
WARNING!
Ensure all burner controls are in the off position. Connect a disposable cylinder or
slowly turn on the gas supply valve (large propane cylinder).
Main Burner Lighting
1. Open grill lid
2. Push and turn any main burner control knob slowly to the 'hi' position. This action will
ignite the selected burner.
3. If the burner does not ignite, then immediately turn the control knob back to the 'off'
position and repeat step 2 several times.
4. If the burner will not ignite within 5 seconds, turn the control knob to the 'off' position
and wait 5 minutes for any excess gas to dissipate, either repeat steps 2 and 3 or light with a
match.
5. If lighting the unit with a match, clip the match into the supplied lighting rod. Hold the lit
match down through the grill while turning the corresponding burner valve to high.
www.napoleongrills.com