Connecting the Speakers
Connect the front, rear and center speakers to the speaker output jack on the side of subwoofer.
HT-DS1000
Connecting Main Unit to Subwoofer
1
Use the supplied DIN audio connection cable to connect DIN
Audio Out on the main unit to DIN Audio Input on the
subwoofer.
2
Press the subwoofer power button on the subwoofer to turn
on the power.
Subwoofer Function
Subwoofer: The subwoofer is active, with a built-in a 150W amplifier, and
outputs rich bass through 8 inch speaker units. You can listen to
the optimal LFE (bass) by using the subwoofer-only volume
control and the variable crossover control.
• The control is calibrated from –6dB (minimum) to +6dB (maximum).
Crossover: The Crossover sets the cutoff frequency for the subwoofer. Set the
Crossover control for the best bass response in your room.
•
You can adjust the bass or treble output from the front, rear,
center speakers and the subwoofer.
•
To the left increases the bass and to the right, treble.
15
Downloaded From TheatreSystem-Manual.com Manuals
Bottom of Main unit
(HT-DS1000)
Rear Speaker (R)
Red
Front Speaker (R)
Rear of Subwoofer (PSWS1000E)
Gray
Center Speaker
Green
Rear Speaker (L)
Blue
White
Front Speaker (L)