Table of Contents
Advertisement
When you tap the buttons, you will see
the following changes in the display:
– When first tapped: The last
temperature selected flashes.
– Each subsequent touch of a sensor:
The temperature is adjusted in 1 °C
steps.
– Leaving a finger on the sensor: The
temperature changes continuously.
Approximately 5 seconds after you
release the sensor, the actual
temperature in the appliance will be
displayed.
or
^ Touch OK to confirm your selection.
When you have adjusted the
temperature, wait for approx. 6 hours
if the appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display, as it will take this long for the
appliance to reach the temperature.
If, after this time, the temperature is still
too high or too low, you will need to
adjust it again.
The correct temperature
Temperature range
The temperature can be adjusted:
– in the refrigerator section from 3 °C
to 9 °C
– in the freezer section from -15° C to
-26° C.
27
Advertisement
Table of Contents
