Table of Contents

Advertisement

7-5. ERROR DISPLAY

If you press the START/PAUSE button when an error is displayed, any error except
disappear and the machine will go into the pause status.
In case of
,
if the error is not resolved within 4 min., power will be turned off automatically and the error code will
blink. But in the case of
ERROR
WATER INLET
1
ERROR
IMBALANCE
2
ERROR
DRAIN
3
ERROR
OVER FLOW
4
ERROR
PRESSURE
5
SENSOR
ERROR
DOOR OPEN
6
ERROR
HEATING
7
ERROR
,
if the error is not resolved within 20 sec., or the in case of other errors,
, power will not be turned off.
SYMPTOM
• Correct water level (246) is not reached within 8
minutes after water is supplied or it does not reach
the preset water level within 25 minutes.
• The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.
• Not fully drained within 10 minutes.
• Water is overflowing (water level frequency is over
213).
If
is displayed, the drain pump will operate
to drain the water automatically.
• The SENSOR SWITCH ASSEMBLY is out of order.
• Door not all the way closed.
• Loose electrical connections at Door switch and
PWB Assembly.
• The DOOR SWITCH ASSEMBLY is out of order.
• The THERMISTOR is out order.
16
will
CAUSE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm0742h series

Table of Contents