Anti-Theft Alarm - Ford FOCUS 2015 Owner's Manual

Hide thumbs Also See for FOCUS 2015:
Table of Contents

Advertisement

E184386
3. Place the first programmed intelligent
access key flat on the symbol at the
bottom of the floor console storage
compartment.
4. Press the push button ignition switch.
5. Wait five seconds and then press the
push button ignition switch again.
6. Remove the intelligent access key.
7.
Within 10 seconds, place a second
programmed intelligent access key flat
on the symbol.
8. Press the push button ignition switch.
9. Wait five seconds and then press the
push button ignition switch again.
10.
Remove the intelligent access key.
11.
Within 10 seconds, place the
unprogrammed intelligent access key
flat on the symbol.
12.
Press the push button ignition switch.
Programming is now complete. Check that
the remote control functions operate and
your vehicle starts with the new intelligent
access key.
If programming was unsuccessful, wait 10
seconds and repeat Steps 1 through 12. If
programming remains unsuccessful, have
your vehicle checked by an authorized
dealer.
Focus (CDH), enUSA, First Printing
Security

ANTI-THEFT ALARM

3
The system will warn you of an
unauthorized entry to your vehicle. It will
be triggered if any door, the luggage
compartment or the hood is opened
without using the key, remote control or
keyless entry keypad.
The direction indicators will flash and the
horn will sound if unauthorized entry is
attempted while the alarm is armed.
Take all remote controls to an authorized
dealer if there is any potential alarm
problem with your vehicle.
Arming the Alarm
The alarm is ready to arm when there is
not a key in your vehicle. Electronically lock
your vehicle to arm the alarm.
Disarming the Alarm
Disarm the alarm by any of the following
actions:
Unlock the doors or luggage
compartment with the remote control
or keyless entry keypad.
Switch your vehicle on or start your
vehicle.
Use a key in the driver door to unlock
your vehicle, then switch your vehicle
on within 12 seconds.
Note: Pressing the panic button on the
remote control will stop the horn and signal
indicators, but will not disarm the system.
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents