Technical Specifications - Ford FOCUS Owner's Manual

WARNING
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.
Note: The lug nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure that the cones on the lug
nuts are against the wheel.
1. Install the wheel.
2. Install the lug nuts finger tight.
3. Install the locking lug nut key.

TECHNICAL SPECIFICATIONS

Tire pressures (cold tires) - All except 2.0L EcoBoost - MI4
Lug nut torque
Wheel type
All
Focus (CB8) Vehicles Built From: 03-03-2014, Vehicles Built Up To: 31-12-2014, CG3568en enGBR, Edition date: 03/2014, None
Wheels and Tires
4. Partially tighten the lug nuts in the
5. Lower the vehicle and remove the jack.
6. Fully tighten the lug nuts in the
7.
231
sequence shown.
sequence shown. See Technical
Specifications (page 231).
Install the wheel trim using the ball of
your hand.
WARNING
Have the lug nuts checked for
tightness and the tire pressure
checked as soon as possible.
Nm (Ib-ft)
135 (100)